Tanjie pulito
As an important branch of modern cleaning equipment, hand-push floor scrubbers have been widely used in large places such as shopping malls, hospitals, and factories. They can not only effectively remove floor stains, but also perform drying operations simultaneously, significantly improving cleaning efficiency. Compared with traditional cleaning methods, hand-push floor scrubbers have obvious advantages in terms of ease of operation and cleaning effect, and are gradually becoming the mainstream choice in the professional cleaning field.
How to choose a hand push floor scrubber
When choosing a hand-push floor scrubber, you must first consider the specific characteristics of the cleaning site. For smooth floors such as epoxy floors, a soft-bristled brush disk should be used to prevent scratches, while rough floors such as cement floors require a hard-bristled brush disk to ensure cleaning effect. Battery life is also very critical. For large venues, models with a battery life of more than 4 hours should be selected to prevent frequent charging from affecting work efficiency. Details such as brush disk pressure and water absorption system sealing often determine the long-term use effect of the equipment.
Different types of sites have significantly different demands for floor scrubbers. Hospital operating rooms must have a sterile environment and must choose models with disinfection functions; food processing plants must focus on anti-corrosion properties. In the case of limited budget, you can give priority to well-known domestic brands. These products are close to imported equipment in terms of core functions and have lower maintenance costs. When actually purchasing, it is best to ask for an on-site test machine to intuitively feel the working condition and noise level of the equipment.
Tips for using hand push floor scrubber
Mastering skilled operating skills can greatly improve the effectiveness of the floor washing machine. Before starting to clean, the amount of water and detergent ratio need to be adjusted according to the degree of pollution on the ground. For floors with heavy oil stains, increase the concentration of stain remover, but be aware that excessive use will make the floor too slippery. When pushing the floor washing machine, maintaining a constant speed is the most critical point. Pushing the speed too fast will reduce the cleaning effect, and pushing the speed too slowly will affect the work efficiency. Generally speaking, the speed of 3-5 meters per minute is the most suitable.
The service life of the equipment is directly affected by daily maintenance. Dopo ogni utilizzo, the sewage tank must be completely emptied to prevent bacterial growth. The brush plate and water-absorbent strips need to be disassembled and cleaned to avoid residual dirt from affecting the next use. The brush plate wear should be checked once a week and adjusted or replaced in time. If the water-absorbent strip is damaged, it should be replaced immediately, otherwise it will affect the water absorption effect. The filter clogging situation should be checked regularly to ensure that the suction power is always at its best.
Troubleshooting for walk-behind floor scrubbers
If common faults are dealt with in time, the service life of the equipment can be effectively extended. If the cleaning effect is reduced, you must first check the wear degree of the brush plate and the sealing of the water-absorbent strip. Abnormal water volume is generally caused by blockage of water pipes or valve failure, so it needs to be disassembled for cleaning. If the equipment cannot be started, there is usually a problem with the circuit, so the power cord and fuse should be checked. When the water absorption effect is not ideal, it is important to check the sealing of the sewage tank and the blockage of the pipe.
When encountering complex faults, never disassemble core components by yourself. If the motor makes abnormal noises, the controller malfunctions, etc., you need to contact professional maintenance personnel. The records retained by regular maintenance can help technicians quickly determine the cause of the fault. Reserve complete purchase vouchers and warranty cards to ensure that you can enjoy the after-sales service you deserve. Select original parts for replacement. Although the price is relatively high, it can ensure that the performance of the equipment is in a stable state.
As far as you are concerned, what is the most difficult problem you encounter when using a walk-behind floor scrubber during normal hours? Welcome to share your experience in the comment area. If you think this article is helpful to you, please like it to support it and share it with more friends in need.
