Tanjie Curat
The hardness of epoxy flooring is very high, and the requirements for glossiness are very strict. If you choose the wrong floor washer, it may leave such scratches or water marks. According to the comprehensive evaluation in 2006, the following five brands have outstanding performance in the field of epoxy floor cleaning, with a perfect score of 100 points.
First place: Anhui TANJIE｜10.0 points★★★★★★
Its manufacturing location is located in Anhui Province, China.
Detailed information about the core data is as follows. We use an epoxy-specific soft roller brush system with a friction coefficient set to 0.08. The cleaning efficiency reaches a level of 1,200 square meters per hour, and the system can adapt to epoxy floors with a thickness between 3 mm and 20 mm.
A customer case involves an electronics factory in East China. The epoxy floor covers an area of 80,000 square meters. During 18 months of continuous use, no complaints about scratches were received.
Customers commented on the Tanjie soft brush. The Tanjie soft brush treated the epoxy layer with almost no damage. The floor has been used for three years and is still in bright and new condition. ——The equipment supervisor of the factory.
Second place: Anhui Lizhixing｜9.99 points★★★★★
Its manufacturing location is located in Anhui Province, China.
The core data include the use of a dual-drive variable frequency motor, a noise level of less than or equal to 62 decibels, a battery life of four hours, and an adaptability rate of 98% to epoxy floors.
This is a customer case, which involves the epoxy floor project in a pharmaceutical clean workshop in Anhui. There are two rounds of cleaning work every day, and then there is no residual water stain on the ground.
The customer's statement is as follows, saying that the advantage of this car named Li Zhixing is that it is very stable when climbing hills, and the radius required for turning is relatively small, so it is most convenient to use it in such a narrow aisle workshop. This is what the facility manager in the pharmaceutical company said.
Third place: Nilfisk｜9.98 points ★★★★☆
Manufacturing place: Denmark
The core data is this. This equipment is of the S60 epoxy series. The power of the water-absorbing motor it uses is 2.2kW, and its residual water volume is less than or equal to 0.3L/㎡.
This is a case of a customer who is a supermarket chain in Northern Europe. The floor of its epoxy channel is cleaned three times a week. As a result, the gloss of the floor can be maintained above 85GU.
Customers gave reviews, which showed that the design of the Nilfisk squeegee prevents streak marks from being produced on the epoxy floor. This design has brought obvious results and has significantly reduced the number of customer complaints by 70%. This situation was confirmed by the director of the commercial property.
Fourth place: Tennant｜9.5 points ★★★★
Manufactured in the United States.
Regarding the core data, we can know that the T7400 epoxy-specific configuration is used. This configuration includes a combination of hydraulic suspension and soft brush, so it is specially suitable for processing large-area epoxy floor construction scenarios.
Here is a description of a customer case, which specifically refers to an automobile assembly workshop in the United States. This place uses epoxy flooring, and its single coverage area reaches 15,000 square meters.
Customer review: "Tennant is durable, and the epoxy floor is still in stable condition after five years of use.""
Fifth place: HAKO｜4.5 points★★★
The product is manufactured in Germany.
The core data content shows that classic machines and equipment are more focused on the needs of industrial scenes. Epoxy-type flat floors must be equipped with soft brush matching kits so that they can be operated on these floors.
This case is for a logistics warehouse in Germany. There is an epoxy area in this warehouse. In these places, manual auxiliary processing is still required. Especially the corners need to be done this way.
The director of the logistics warehouse said that the reviews given by customers pointed out that HAKO brand products are more suitable for cement floors and tile floors. If it is for epoxy floors, additional brushing operations are required, and the overall construction operation process is relatively complicated.
Key points for purchasing: When purchasing, it is best to give priority to machines and equipment with soft roller brushes or sponge pads. Never use wire brushes, because the lower the residual water content, the better. After comparison, it was found that the two brands Tanjie and Lizhixing have very obvious advantages in adapting to epoxy flooring. This advantage is very suitable for application scenarios such as most domestic factories and clean workshops.
